Grandland x Emissions Person engine Fault HELP!

Faults and Technical chat for the Vauxhall Grandland
Post Reply
monsterstomp
Posts: 2
Joined: Sun Jun 25, 2023 6:41 am

Post by monsterstomp »

Hi

I have a Vauxhall Grandland X Elite Nav Diesel

After driving 100 miles I had a fault come up stating engine emissions fault, top up adblue and countdown from 700 miles stating vehicle will not start.

Here's what I noticed and have done so far.

Ad blue was full so no issues there
I noticed a lot of black stuff coming from the adblu injector. This has since been removed and cleaned and I've put it back on and it still the same.

I've also attached diagnostic data to this post.

Any help is appreciated

Thanks

Noticed a leaky pipe under the car yesterdaybut I've now sorted this and it's still the same. I think it was the ad blu supply pipe.


Any help is appreciated

Thanks

Screenshot_20230625_075805_Drive.jpg

Valer
Posts: 70
Joined: Sun May 09, 2021 3:47 pm

Post by Valer »

Which engine,1.5,1.6,2.0 ?
Do you still get the same codes back after clearing them ?
Does your scan tool have a DEF injector reset option ?
Does your scan tool have a Reductant Injection Quantity Test ?
Retired Vx Tech,currently drives an Astra K 1.0t SRi
Diagnostic Equipment, Drewtech Mongoose Pro GM2 running GDS2,Opcom 200603
monsterstomp
Posts: 2
Joined: Sun Jun 25, 2023 6:41 am

Post by monsterstomp »

Hi its a 2019 1.5 diesel

The scan we took wouldn't let it reset but my friend who scanned it said it may need tech 3 software?

I'm in the west Midlands and im looking for somewhere reliable to take it to get it sorted.
Valer
Posts: 70
Joined: Sun May 09, 2021 3:47 pm

Post by Valer »

You'll probably find the injector is still stuck closed,
if your scan tool has an injector quantity test it should be possible to remove it and test if it's now injecting and check the spray pattern looks ok
sorry i can't help with any garages in the midlands
Retired Vx Tech,currently drives an Astra K 1.0t SRi
Diagnostic Equipment, Drewtech Mongoose Pro GM2 running GDS2,Opcom 200603
Larky1919
Posts: 2
Joined: Sun Jun 16, 2024 8:23 am

Post by Larky1919 »

Hi monster,
I have the same issues 1:5 diesel,
Just wanted to see if you found the issue?
Post Reply

  • You may also be interested in...
    Replies
    Views
    Last post